Omega Engineering CYD201 Manual de usuario Pagina 19
- Pagina / 60
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
OMEGA Model CYD201/CYD208 User’s Manual
Installation 2-7
2.6 SENSOR CURVE DEFINITION
To display accurate temperature, select a response curve that matches the
installed sensor. There are seven standard curves stored within the Model
CYD201/CYD208 numbered 0 through 6 (see Appendix A). Different curves
may be assigned to each channel of the Model CYD208. Find the unit
factory curve configuration inside the front cover of this manual. Curve 6
(CY-7 Curve 10) is the standard curve configuration unless specified
differently upon order.
To determine current curve selection, press and hold
UNITS
and turn on (1)
the rear panel SET switch (DIP switch 3). Release
UNITS
key. The CYD201
displays the curve number in the display window. The Model CYD208
displays the curve number in the display window and the channel number in
the channel window. To display curves for other channel numbers in the
Model CYD208, press
CHANNEL
to scroll through the eight channels.
To change the curve, press
UNITS
. The instrument scrolls through curves 0
through 6. In the Model CYD208, press
CHANNEL
to select other channels,
then press
UNITS
to scroll through the curves.
After the new curve selection, turn the SET switch on the rear panel off (0).
The unit returns to normal operation.
Table 2-2. Model CYD201/CYD208 Temperature Curves
Curve No. Range (K) Description
0
1
2
3
4
5
6
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 324.9
0 – 474.9
DT-500DI-8B
DT-500DI-8A
DT-500DRC-D
DT-500TDC-E1
CTI Curve C
DT-500DI-8C
CY-7 Curve 10
2.7 RACK MOUNTING
The Models CYD201 and CYD208 can install in a standard “size” 1/4 panel
EIA rack space. If you ordered a CYD208-DIN rack mounting adapter, follow
the installation instructions below. See Figure 2-3.
1. Remove front feet on bottom of unit and attach lower rack piece by
threading two of the four screws provided into the front feet holes.
2. Locate the two mounting hole access covers on the top of the unit.
Attach the other rack with the remaining screws.
- 1
- 1
- RETURN REQUESTS / INQUIRIES 2
- WARRANTY 2
- TABLE OF CONTENTS 3
- TABLE OF CONTENTS (Continued) 4
- LIST OF ILLUSTRATIONS 5
- LIST OF TABLES 5
- CHAPTER 1 7
- INTRODUCTION 7
- 1.2.2 LHe and LN 9
- Safety Precautions 9
- 1.2.3 Recommended First Aid 10
- CHAPTER 2 13
- INSTALLATION 13
- 2.4.1.1 Two-Lead Measurement 15
- 2.4.1.2 Four-Lead Measurement 15
- 2.4.3 Sensor Mounting 16
- 2-10 Installation 22
- CHAPTER 3 23
- OPERATION 23
- 3.5.1 Alarm Setpoint 24
- 3-6 Operation 28
- CHAPTER 4 29
- REMOTE OPERATION 29
- 4-2 Remote Operation 30
- J2 SERIAL I/O 30
- 4.1.3 Sample Basic Program 31
- R Alarm Reset 33
- Y Channel Dwell Time 33
- YC Channel Scanner Channel 34
- YH End Scanning 34
- YS Begin Scanning 34
- WA Switch ID and Alarm Data 34
- WY Scan Status 35
- 4-8 Remote Operation 36
- CHAPTER 5 37
- Service 5-7 43
- 5-8 Service 44
- CHAPTER 6 45
- OPTIONS AND ACCESSORIES 45
- Interface Output 47
- CYD201 or 47
- 6-4 Options and Accessories 48
- APPENDIX A 49
- CURVE TABLES 49
- Appendix A A-3 51
- Appendix A A-5 53
- Appendix A A-7 55
- (Continued) 56
- NOTES 57
- TEMPERATURE 59
- PRESSURE/STRAIN 59
Relacionado con productos y manuales para De medición, control y control Omega Engineering CYD201
(15 paginas)Sony HT-CT390 manuály
Uživatelské manuály a uživatelské příručky pro ne Sony HT-CT390.
Poskytujeme 7 manuály pdf Sony HT-CT390 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentarios a estos manuales